High pressure gas / liquid is produced on a small area piston by driving a low pressure gas (2 - 8bar) of a large area piston. It can be used for compressed air and other gases, and the output air pressure can be stepless regulated by driving air pressure. The booster pump of gas pipeline has single acting pump and double acting pump. The double acting pump piston compresses the gas in two strokes of reciprocating stroke.
When the driving gas acts on the gas piston, the working piston can obtain larger output flow with the gas driving. The booster pump has the following features: simple maintenance: parts and seals of the booster pump are less, the maintenance is simple and the cost is low. High cost performance: booster pump has high output performance and low cost characteristics. Adjustability: the output pressure and flow of the booster pump are regulated accurately by the pressure regulating valve of the driving gas.
调节驱动气压，使气压管道增压泵的输出压力在预增气压和最大输出压力之间精确调整。 输出压力高：气动液体管道增压泵的最高工作压力可达到700Mpa，气动气体管道增压泵的最高工作压力可达到300 Mpa。
Adjusting the driving pressure, the output pressure booster pump pressure pipeline precise adjustment between the pre pressure and maximum output pressure. The output pressure is high: the maximum working pressure of the pneumatic liquid pipe booster pump can reach 700Mpa, and the maximum working pressure of the pneumatic gas pipeline booster pump can reach 300 Mpa.
High quality material: high pressure part of booster pump is made of hard aluminum alloy. High pressure plunger material is stainless steel. Double layer seal is adopted. The material of key parts can be chosen according to the dielectric property. A variety of gas driven: compressed air, nitrogen, steam and so on.
This article by gas booster pump friendship dedication, more relevant knowledge, please click: http://xacrystaledu.com
, we will use the most advanced technology, the most sincere attitude, to provide you with the most comprehensive service. We will continue to dedicate to you, please look forward to.