High pressure is needed for individual or part of the 1. gas path.
2. the pressure of the main gas path of the factory is reduced, and the pressurized pump is used to provide high pressure gas to maintain the normal operation of the pneumatic device when the minimum pressure pressure of the pneumatic device is not guaranteed.
3. large diameter cylinders can not be configured, but the output force must be ensured.
4. air operated remote operation must be pressurized to compensate for pressure loss.
5. it is necessary to improve the hydraulic pressure of the linkage cylinder.
6., we hope to shorten the time of filling the tank to a certain pressure.
7. is used for air tightness detection.
8. for all kinds of gas filling.
3. automatic pressure keeping: no matter what causes the pressure drop of the pressure retaining loop, the booster pump will start automatically, replenish the leakage pressure and keep the loop pressure constant.
4. operation safety: gas drive, no arc and spark, completely used for flammable, explosive liquid or gas.
5. maintenance simple: compared with other gas displacement pumps, the booster pump can perform the same work, but its parts and seals are few, and its maintenance is simple.
6. cost performance high: pressurized pump is a type of plunger pump, working when the pressurized pump works quickly, with the increase of output pressure, the pump's reciprocating slow until stop, at this time the pressure of the pump is constant, the energy consumption is the lowest, each component stops moving.
With a small summary above, I hope to be helpful to our customers. If there is anything that is not understood or if you are looking for help, please click on our official website: the gas booster pump http://xacrystaledu.com or the call consultation, we will do our best to solve the problem.