When the gas and liquid supercharging equipment is used for a long time, the gas liquid supercharging pump may leak out of the equipment, some leak out from the solenoid valve, some leak out from the air inlet, and some leak out from the end cover.
The problem of gas liquid booster pump may seriously affect production.
1. Before the gas liquid booster pump is connected to the gas path, the pipelines, air outlets and components must be clean and clean, and there must be no dust and sundries.
2. To ensure the normal use of seals in the gas and liquid supercharging pump, use dry and clean compressed gas, add effective air treatment components (three points) into the cylinder gas source and add lubricating oil and drainage treatment on time.
3, control system must be based on gas liquid booster pump series action program.
4, gas liquid supercharging series products change liquid medium (anti wear hydraulic oil) according to the frequency of pump, high frequency 3 months to replace liquid medium (anti-wear hydraulic oil), replace liquid medium for 8 months (anti wear hydraulic oil) or when the hydraulic oil in the oil pipe becomes black or milk white, replace hydraulic oil.
5, in order to ensure the stability of the gas liquid booster pump, it is recommended that you install an air storage tank between the triplet and the pressurized gas and liquid as far as possible to ensure that the gas source is stable.
6. If the gas liquid booster pump is too large, add a reverse pressure reducing valve to the pressurized intake port.
7, when replacing the hydraulic fluid, the gas liquid booster pump must pay attention to the gas inlet and the sundries entering the pump body, which will affect the life of the gas hydraulic booster pump.